Advantek Networks ALN-328R Manual de usuario descargar pdf (Pagina 152)

147

Troubleshooting

This chapter contains a list of problems that may be encountered while using the

Wireless Broadband Router, and techniques to try and overcome the problem.

Note that these techniques may not solve the problem (or problems).

Accessing the Router if Locked Out

If the Router’s connection is lost while making configuration changes, a setting

that locks access to the MegaControl Panel may have inadvertantly been acti-

vated. There are three common ways to lock access to the Router:

Scheduler If a schedule has been created that applies to the computer over the

connection being used, the Router will not be accessible during the times set in

the schedule. To regain access, either wait until the connection is scheduled to be

active again, or restore the default settings to the Router.

LAN Firewall If the firewall setting for the local network is set to maximum,

no computers from the network will be able to connect to the Router. To gain

access, restore the default settings to the Router.

Access Control If the access control setting for the computer is set to block the

computer, access to the Router will be denied. To gain access, restore the default

settings to the Router.

Restoring the Router’s Default Settings

There are two ways to restore the Router’s default settings. The first is to use the

tip of a ballpoint pen and depress the “Reset” button on the back of the Router

for at least ten seconds. The second is to access the Router’s MegaControl Panel

and navigate to the “Advanced Settings” screen. Click on “Restore Defaults” and

read the instructions on-screen. Note that after performing either of these two

procedures, all previously saved settings on the Router will be lost.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 178 179

Sin comentarios

Advantek Networks ALN-328R Manual de usuario Pagina 152