Advantek Networks ALN-328R Manual de usuario descargar pdf (Pagina 57)

EKI-6311GN-User_Manual V2.1 Page 51

Ping Watchdog

Enable Ping Watchdog: To activate ping watchdog, check this checkbox.

IP Address to Ping: Specify the IP address of the remote unit to ping.

Ping Interval: Specify the interval time to ping the remote unit.

Startup Delay: Specify the startup delay time to prevent reboot before the EKI-6311GN is fully

initialized.

Failure Count To Reboot: If the ping timeout packets reached the value, the EKI-6311GN will

reboot automatically.

Date Rate Test

The Data Rate Test allows you test the current RSSI at each data rate between your EKI-6311GNs.

Figure 20 Data Rate Test

Antenna Alignment

Under Bridge mode, when the bridges are not easily visible from the location where the dish will be

installed, the antenna alignment tool can help you evaluate the position of the unit and adjust the angle

of the antenna more precisely. Keep it that in real circumstances a lot of additional factors should be

taken into account when your unit is installed. These factors include various obstacles (buildings, trees),

the landscape, the altitude, transponder orientation, polarization, etc.

To use the tool, select the desired remote WDS bridge and click “Start”, the web page will display the

measured signal strength, RSSI and transmit/receive packets. If the signal quality is not quite good, try

to adjust the antenna and see if the quality improves or not.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 78 79

Sin comentarios

Advantek Networks ALN-328R Manual de usuario Pagina 57